Changing the wall tiling in a bathroom or kitchen is one of the most common ways people choose to update their homes. It can instantly give a room a facelift, especially if the former tiles were outdated, chipped, or broken. Many people have new wall tiles fitted when they replace their bathroom fittings or kitchen units. Similarly, adding a tiled floor is a common update people make in their homes, as a tiled floor is a practical option that looks smart and is easy to maintain. Regardless of whether you are laying floor or wall tiles, it is essential that the job is done well. There are many benefits to using a tile leveling system for this process. Here is an overview of these benefits and a guide to using a tile leveling system effectively.
The Benefits of Using a Tile Leveling System
Many people mistakenly believe that they can easily lay level tiles without using a tile leveling system, only to find that this wasn’t as easy as they thought. Before deciding to go ahead with a tiling job without a tile leveling system, it is worth knowing the benefits of using a tile leveling system. These include:
• Reduced lippage- The main purpose of using a tile leveling system is to avoid lippage, which is when the edges of the tiles do not align, and some are slightly raised.
• Safety- If floor tiles are uneven, it is a tripping hazard. Therefore, using a tile leveling system is important for safety reasons.
• Saving time- You may think that using a tile leveling system is a waste of time. However, the opposite is true. Using these systems will help you to get the job done right the first time, thus reducing your need to remove tiles after laying them and start the job again.
• Professional finish- If you use a tile leveling system, the end result is a more professional finish than you achieve without one.
• Saving money- As you are less likely to make mistakes when doing a tiling job using these systems, it can reduce wastage and this will save you money.
How to Use a Tile Leveling System
Now that you know the many benefits of using a tile leveling system, you are probably more keen to use them for your next tiling job. Therefore, you should learn how to use a tile leveling system before you begin the job. There are many different products available, and not all of them work in the same way. However, the following guide gives you the basic steps with advice for using the different variations. Here is how to use a tile leveling system.
Step 1: Prepare the surface on to which you are laying the tiles so that it is as flat as possible.
Step 2: Apply tile adhesive to enough of the surface to apply a few tiles at a time.
Step 3: Apply tile adhesive to the back of your first tile and lay it on the floor or wall, pushing it firmly in place.
Step 4: Take your tile spacer and add two to each exposed side of the tile. The base of these should slot below the tile you have added.
Step 5: Next, lay your next tile so that the bases of the spacers are below both the first and second tiles.
Step 6: The next stage depends on which type of tile leveling system you are using. If you have clips or wedges, then these will slide into a hole at the top of the spacer. Pushing them in firmly will force the tile don flat and make sure the two tiles are level.
Step 7: Alternatively, if your tile leveling system has caps, fit them over the top of the spacer. Some systems have caps that rotate to push down the tiles. Others come with a set of pliers that you use to tighten the spacers and caps.
Step 8: Add more spacers to the exposed sides of the second tile before adding a third tile and adding the caps, clips, or wedges.
Step 9: Repeat this process until all the tiles are laid, and there are at least two spacers for each pair of tile edges. You may need more for larger tiles.
Step 10: Leave the tile adhesive to dry. This can take various amounts of time depending on the product. Check the product guidelines for this information.
Step 11: Once the tile adhesive is dried. Remove the caps, clips, or wedges.
Step 12: You are then left with the exposed ends of the spacers. In most tile leveling system, these will simply snap off form the base.
Step 13: Grout between the tiles.
There are many benefits to using tile leveling systems when laying either floor or wall tiles. It can prevent lippage, reduce the likelihood of accidents, achieve a professional finish, and save both time and money. Once you know how to use a tile leveling system, it is a very simple process that will give you the best results possible.